Die cuts add color and interest to your project.
Die cuts, which can be cut into thousands of shapes and letters, are a quick and easy way to add layers and pizazz to your paper, wood and fabric crafts. Depending on the material you are working with, gluing your die cut is a simple project as long as you remember to use the right kind of adhesive and pay special attention to the edges and intricately cut parts.
Instructions
1. Determine the right type of adhesive for your project. For a paper project, such as a scrapbook page, look for a glue stick or runner tape that is acid-free and photo-safe. Glue stick glue is better for smaller die cuts and tends to adhere more permanently than some runner tapes. For wood projects, purchase a liquid glue designed for wood. Fabric die cuts should be adhered with a tacky-style fabric glue.
2. Apply the glue to the back of your die cut. If you are applying liquid glue, leave about a half inch border at the end of your piece to allow for the glue to spread when you press it onto your project. If you are using stick glue on paper die cuts, apply the adhesive to the very edge of your die cut. Pay special attention to intricate cuts and edges, being sure to apply glue to those parts without tearing.
3. Apply a thin layer of glue to your project. To ensure good adhesion, apply a small amount of glue to your project in the space you wish to put your die cut. For liquid glue, you may want to brush this layer of glue on with a soft haired paintbrush to get it thin enough.
4. Attach your die cut to your project. Apply firm pressure. Allow the glue to set in a dry place. Depending on your material and the size of your die cut, this might take anywhere from a few minutes to a few hours.
Tags: your project, liquid glue, glue your, glue your project, layer glue, special attention, stick glue