Invacare hospital beds help patients receive proper health care at home while dealing with an illness or recovering from surgery or other medical procedure. Invacare hospital beds are easy for either the patient or a helper to operate, as the beds are fully automatic and require no specific knowledge of durable medical equipment.
Instructions
1. Press and hold the "Head Up" button in the top left corner of the remote pendant. This makes the head spring move up.
2. Press and hold the "Head Down" button in the top right corner of the remote pendant. This lowers the head spring.
3. Press and hold the "Foot Up" button in the lower left corner of the remote pendant. This will move the foot spring up.
4. Press and hold the "Foot Down" button located in the bottom right corner of the remote pendant. This will lower the foot spring.
5. Press and hold the "Bed Up" button located in the middle left section of the remote pendant. This raises the entire bed up.
6. Press and hold the "Bed Down" button located on the middle right side of the remote pendant. This lowers the whole bed.
7. Raise and lower the entire bed manually by inserting the coupler end of the crank bar into the outer gear box shaft located on the foot board of the Invacare bed.
8. Turn the crank bar clockwise to lower the entire bed. Turn the crank bar counterclockwise to raise bed.
Tags: pendant This, Press hold, remote pendant, remote pendant This, corner remote, corner remote pendant