Moen's Hydrolock connector is a piece of technology that really makes disconnecting the entire faucet easier. This connector bridges the main connections in the faucet, allowing them to come out when the faucet is being replaced or repaired. Instead of unscrewing the connectors with a wrench, all you need to do is unsnap them. If your faucet has one of these connectors, you'll find using it very simple. The whole process takes less than five minutes to complete and requires no special tools.
Instructions
1. Clean out the area under the sink to remove all obstructions, like large pots, cleaning products and kitchen tools. This allows more access to your sink cabinet area.
2. Find the faucet hose and follow it until you come across the Moen Hydrolock connector. It is a black connector with two white tabs on one side. The tabs are part of a button that clicks into place to secure the connection.
3. Grasp the connector and press down on the tabs. Turn the connector to dislodge the tabs and undo the connection. You'll hear a snap as the connection comes out.
4. Pull the connector off the hose by hand. To reconnect, simply place the two ends together. Turn the connector and press the tabs down. Listen for the click to tell you the connection is made.
Related Posts:
Reinstall A Moen Kitchen Faucet
Re-installing a Moen kitchen faucet requires a few simple steps. The following steps are general faucet installation instructions. There are various types of Moen faucets and some require speciali...
Adjust The Hot Water On A Moen Kitchen Faucet
Moen kitchen faucets come in 188 different varieties. Each faucet has a way to dispense hot water, cold water or a mix between the two. With the large number of different Moen faucets, each one ha...
Identify Moen Single Handled Kitchen Faucet Model
Perhaps you need to identify a Moen single handled kitchen faucet model so that you can include its name in a description for potential home buyers, or perhaps you need to identify it because you...
Fix A Moen Single Handle Kitchen Faucet
Moen's single-handle kitchen faucet assembly uses a ball faucet, whereby a metal ball within the faucet assembly controls the flow and temperature of the faucet's water. The ball rests upon three...
Repair A Leaking Moen Kitchen Faucet
Moen kitchen faucets use a cartridge-style valve assembly, instead of the ball valve assembly some other manufacturers use on single-handle faucets. Removing a cartridge does not require the intri...